Here’s advice on the simplest type of atmosphere compressor; the 2/2 style.
The initial 2 in the 2/2 air compressor refers to the amount of”working” air vents that are observed inside the valve. That is the range of ports that supply air to the valve and channel the compressed air to whatever it is that the valve is assumed to perform.
Many 2/2 valves will probably have numbers or letters piled, painted or cast near each of their two”working” air vents. If there are numbers near the vents, the number one is the source port to create the compressed air to this valve.
If the port designations are all letters, subsequently port’A’ would be the supply port and interface’B’ the working interface. Find out more about ace air valve Thailand via online sources.
If the 2/2 valve is to be”atmosphere controlled”, this really is an external atmosphere signal is always to be utilized to shift the 2/2 valve, it is likely to soon be an additional port.
That port may not own a designation or it might say’1-2′. No, that’s not really a twelvemonth, but rather indicates that air will flow out of port 1 to port two when an outside atmosphere signal operates that valve.
The next 2 in a 2/2 air valve indicates the number of places that the interior valve mechanism has. In this case, too. If this valve is operated or actuated, then it will either open or close. At remainder, that is as soon as the external valve operator has not yet been actuated, the internal valve mechanism will stay open or shut.
Most 2/2 compressed air valves have been classified as NC. NC stands for normally shut. This usually means that when the valve isn’t actuated, it’s ordinary state is shut, and compressed air cannot pass through it.